zfree
请问各位专家哪里有EQS6.1的详细使用方法教程
谢谢
yihui
我手头没有这个软件,它本身没有帮助么……
shoeda
我这里也没有,没有接触过!
zfree
本来想用amos的,但有人说amos在处理discrete data的时候会有些问题,所以改用EQS
这个软件有十几M,不知道能不能传上来,供大家学习使用
yihui
给您发Email没有收到么……
zfree
[quote]引用第4楼谢益辉于2006-07-25 21:11发表的“”:
给您发Email没有收到么……[/quote]
发到邮箱了,请查收
zfree
[quote]引用第4楼谢益辉于2006-07-25 21:11发表的“”:
给您发Email没有收到么……[/quote]
发送失败,晕~~~
yihui
文件太大了吧,分卷压缩给我如何?或者用QQ、MSN传给我,谢谢:)
zfree
[quote]引用第7楼谢益辉于2006-07-31 21:52发表的“”:
文件太大了吧,分卷压缩给我如何?或者用QQ、MSN传给我,谢谢:)[/quote]
已经发到邮箱了,这次发送成功,呵呵
另有问题向你请教,写在邮件里了
anita_jiu
To some extent, EQS functions similar to AMOS, I think. You can input SPSS data to EQS, then you draw your model (through pictures) on the software which will generate equations and test whether you data fits on the equations. EQS' print output, all you are interested in is whether the data fits the model. If yes, great; otherwise, you need to change the model (=picture, e.g. adding to deleting some arrows), and evaluate the outcome again. As long as you get the best fit, that's your model and perhaps the point to stop playing with EQS.
Best regards,
Anita
anita_jiu
sorry, a typing mistake, it should be '=picture, e.g. adding or deleting some arrows, changing their directions, etc)
yihui
[quote]引用第8楼zfree于2006-08-02 15:33发表的“”:
已经发到邮箱了,这次发送成功,呵呵
另有问题向你请教,写在邮件里了[/quote]
邮件已回。
请问你的原始文件是什么格式的?
zfree
[quote]引用第11楼谢益辉于2006-08-02 18:46发表的“”:
邮件已回。
请问你的原始文件是什么格式的?[/quote]
邮件已经回复
cathyxu
各位专家好!哪位能帮忙提供EQS6.1软件的使用说明?多谢!
feifeichen
我有复印件,扫下来工作量大.......